 |
28-Port Layer 2 Gigabit Switch (24 POE+ & 4 10Gig ports) * 24 Gigabit POE+ ports * 4 x 10 Gigabit SFP+ ports * 400 Watts POE Power Budget * 128 Gbps Backplane Switching capacity * Port-based & 802.1Q tag-based VLAN * Auto Voice VLAN for easy VoIP deployment and best call quality * Compliant with Switch Management of Vigor Router * Fully integrated with IPTechView for Cloud management |
DrayTek VigorSwitch P2280x is a Layer 2+ Managed Gigabit PoE switch ideal for a network with growing network traffic. The switch has 24x Gigabit Ethernet PoE/PoE+ ports with a power budget of 400 watts and 4 additional dedicated SFP+ for 10G Fiber link. It provides various types of VLAN for you to segment the local network and keep the traffic only at where it needs to go. Moreover, it supports VLAN routing to route the inter-VLAN traffic directly, shares loads of the router, and improve overall network performance.
Key Features
PoE (Power over Ethernet)
Deliver power and data over one ethernet cable, turn on/off the PoE device periodically with PoE Schedule.
PoE Device Check
Enable Ping Watchdog for all PoE devices, if they lose their network connection, automatically restart them by a power cycle.
Wire-Speed VLAN Routing
Improve overall network performance by using VigorSwitch P2280x to route the inter-VLAN traffic directly and offload the router.
Auto Surveillance & Voice VLAN
Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.
IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more
Access Control
VigorSwitch P2280x supports ACL by IP/MAC and 802.1x port access control with RADIUS to filter unauthorized hosts.
10G SFP+
Provides 10G-capable fiber SFP ports for aggregation or uplinking to the core switches.
ONVIF-Friendly
Recognize the ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more
QoS (Quality of Service)
Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.
IPv6 Ready
VigorSwitch P2280x supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
Multiple Admin Accounts
Multiple Admin accounts with two levels of administrator privilege.
Central Switch Management
Set up VLAN easily from the router and get a centralized hierarchy view of the switches. Learn more
Interface |
|
| LAN Port | 24x 10/100/1000Mbps Ethernet PoE+ PSE, RJ-45 4x 1000Mbps/10Gbps SFP+ slot |
| Console Port | 1x RJ-45 |
| Factory Reset Button | |
PoE |
|
| PoE+ (802.3at)-Capable Ports | 24 |
| PoE (802.3af)-Capable Ports | 24 |
| PoE Power Budget | 400 watts |
| Power Limit | |
| Scheduled On/Off | |
| Power Cycle on Port | Manual, Ping Watchdog |
Capacity |
|
| Buffer Size | 12 Mbit |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps (64 bytes) |
| MAC Address Table | 16k |
| Jumbo Frame | Up to 12 KB |
| L3 Routing Table | Max. 1k |
Networking Standards |
|
| IP Version | IPv4, IPv6 |
| Ethernet Standards | 802.3 10Base-T 802.3u 100Base-T 802.3ab 1000Base-T IEEE802.3ae 10GBase-X 802.1q Tag-based VLAN 802.3x Flow Control 802.3 Auto-Negotiation 802.1p Class of Service 802.1d STP 802.1w RSTP 802.1s MSTP 802.3ad LACP 802.1ad QinQ 802.1x Port Access Control 802.1AB LLDP 802.3az EEE |
VLAN |
|
| Max.Number of VLAN | 256 |
| VLAN Type | 802.1q Tag-based MAC-based Protocol-Based Management VLAN Voice VLAN Surveillance VLAN |
| 802.1x Guest VLAN | |
| Port Isolation | |
| GVRP | |
| Q-in-Q | Basic |
ONVIF Surveillance |
|
| Discovery | |
| Surveillance Topology | |
| Real-Time Video Streaming | |
| ONVIF Device Maintenance | Firmware Upgrade, Configuration Backup, Reset Factory Default, Time Settings, Reboot |
QoS |
|
| Number of QoS Queues | 8 |
| Rate Limit | Port-Based Ingress and Egress |
| Queue Scheduling | SPQ, WRR |
| CoS (Class of Service) | 802.1p CoS, DSCP, CoS-DSCP, IP Precedence |
Security |
|
| Access Control List | MAC, IPv4, IPv6 |
| Storm Control | Broadcast, Unknown Multicast, Unknown Unicast |
| DoS Defense | |
| 802.1x Port Access Control | |
| IP Source Guard | |
| IP Conflict Prevention | |
| Loop Protection | |
| Dynamic ARP Inspection | |
| DHCP Snooping with Option 82 | |
Link Aggregation |
|
| Max. Number of Group | 8 |
| Max. Number of Member in Each Group | 8 |
| Type | Static, LACP |
| Traffic Load Balancing | |
Multicast |
|
| IGMP Snooping | v2, v3(BISS) |
| IGMP Querier | |
| MLD Snooping | v1, v2(Basic) |
| Max. Number of Multicast Group | 256 |
| Group Throttling | |
| Group Filtering | |
| MVR (Multicast VLAN Registration) | |
Layer 3 Features |
|
| Static Route | |
| VLAN Route | |
AAA |
|
| Authentication Server | RADIUS, TACACS+ |
| Port Authorization | |
| Management Account | |
| RADIUS Attribute Assignment | User Privilege, VLAN |
| Accounting | |
| Multiple Server | |
Management |
|
| Web Interface | HTTP, HTTPS |
| Command Line Interface | Telnet, SSH |
| OpenVPN Client | Certificate-based authentication |
| User Authentication | Local Database, RADIUS, TACACS+ |
| sFlow | |
| SNMP | v1, v2c, v3 |
| RMON Group | 1, 2, 3, 9 |
| Private MIB | |
| LLDP | LLDP-MED, Media Endpoint Discovery Extension |
| Mail Alert | Port Status, Port Speed, System Restart, IP Conflict |
| Syslog | |
| 2-Level Admin Privilege | |
| Multiple Admin Accounts | |
| Managed by Vigor Router SWM | |
| Config File Export/Import | |
| Dual Image | |
| SNTP (Simple Network Time Protocol) | |
| Diagnostics Tools | Port Mirroring, Ping, Cable Test |
Physical |
|
| 19-inch Rack Mountable | Mouting Kit Included |
| Max. Power Consumption | 480 watts |
| Dimension (mm) | 441(W) x 270(D) x 44(H) |
| Weight | 4.26 kg (9.0 lb) |
| Ventilation | Variable-speed Fan |
| Operating Temperature | 0 to 45°C |
| Storage Temperature | -20 to 70°C |
| Operating Humidity | 10 to 90% non-condensing |
| Storage Humidity | 5 to 90% non-condensing |
| Certificate |   |